BULLSONE 2-STEP COMPOUND (STEP #1 + STEP #2) 150㎖ *2

🛠️ What It Is

BULLSONE 2‑STEP COMPOUND is a two‑stage paint correction compound set used to remove scratches, stains, water spots, tar, and other surface imperfections — then restore gloss and smoothness to the paint. It includes:

✔️ STEP #1 — coarse compound for larger flaws and deeper marks
✔️ STEP #2 — fine compound for small scratches and gloss restoration 

🧼 How to Use Them (Step‑by‑Step)

1️⃣ Wash the Car First

Before using either product, wash and rinse the car thoroughly so loose dirt and debris won’t cause more scratches during compounding. 

2️⃣ STEP #1 — Big Flaws & Deeper Marks

This thicker, coarser compound is for:

• Larger scratches

• Paint stains

• Water spots

• Tar, oil, or sticky residue

• Rust marks

How to apply STEP #1:

1. Put a small amount (about a 1 cm blob) on a clean, soft cloth or applicator.

2. Rub it gently but firmly onto the affected area, moving perpendicular to the scratch direction.

3. Once the imperfections are reduced, wipe off the residue with a clean microfiber cloth.

4. After this stage, the paint will look smoother but may still lack shine — that’s when you go to Step #2. 

🧠 Tip: Only use Step #1 where needed, not the entire car surface.

3️⃣ STEP #2 — Fine Scratch Removal & Gloss Restore

This finer compound is for:

• Smaller surface scratches

• Swirl marks

• Bringing back gloss and shine

• Refinishing the area you treated with Step #1

How to apply STEP #2:

1. Again, use a small amount on a clean cloth or sponge.

2. Work on small sections at a time (don’t do the whole car at once).

3. Rub gently, then wipe off with a clean microfiber cloth until the surface looks smooth and shiny. 

Summary of Each Step

📌 STEP #1 — Heavy correction phase
✔ Removes deeper scratches and stubborn stains
✔ Uses coarser abrasive to even out the surface

📌 STEP #2 — Finishing phase
✔ Removes lighter scratches, swirl marks
✔ Restores gloss and smoothness to the paint

🚗 When You Should Use This

This 2‑step compound set is ideal if you:
🔹 Want to remove scratches and spots
🔹 Are prepping the paint before waxing or coating
🔹 Want a smoother, glossier surface without professional tools

It’s a simple DIY paint correction system that works step‑by‑step from rough to fine polishing.